Tel: +86-769-88996313

E-mail: sf@camda.cc

You are here: Home > Product > Electrical Panels
ATS Panel

ATS Panel

CAMDA Automatic Transfer Switch (ATS) ATS is an electrical switch that transfers electric power source from its primary source to a standby source. Our ATS is automatically operated. It is often installed where a backup generator is located, so that the generator may provide temporary electrical...

Send Inquiry
Product Details

CAMDA Automatic Transfer Switch (ATS)

ATS is an electrical switch that transfers electric power source from its primary source to a standby source. Our ATS is automatically operated. It is often installed where a backup generator is located, so that the generator may provide temporary electrical power if the utility source fails.


CAMDA ATS Model Table

ATS Model

Capacity Rating

No. of poles

Switcher brand

Controller brand

KDATS-40A

40A

4 Poles

FRANCE
SOCOMEC

HONG KONG
HARSEN

KDATS-63A

63A

KDATS-80A

80A

KDATS-100A

100A

KDATS-125A

125A

KDATS-160A

160A

KDATS-250A

250A

KDATS-400A

400A

KDATS-600A

600A

KDATS-800A

800A

KDATS-1000A

1000A

KDATS-1250A

1250A

KDATS-1600A

1600A

KDATS-2000A

2000A


Our characteristics

●Isolation with positive break indication.

●On load switching.

●Manual emergency operation.

●3 stable positions (Ⅰ,0,Ⅱ) or overlapping contacts on request (Ⅰ,Ⅰ+Ⅱ,Ⅱ).

●Padlocking in 0 or in all three positions (Ⅰ,0,Ⅱ).

●AUTO / MANUAL selector.

●Meter displaying for power output, three phases current and voltage, frequency.

●Light and sound alarm for set faults.

●Emergency stop button beside control panel.

●Enclosure cabinet are painted by electrostatic polyester powder paint. Protection class Ip23.


1(001).jpg

Conformity to standards

●IEC 60947-3

●EN 60947-3

●NBN EN 60947-3

●BS EN 60947-3

●GB 14048

●IEC 60947-6-1

●EN 60947-6-1

●NBN EN 60947-6-1

●BS EN 60947-6-1

●VDE 0660-107


Generators Synchronization Panel

Synchronization is an efficient power distribution unit to combine multiple gensets as one complete power source providing electricity for various loads. It can distribute loads reasonably, easy for expanding local power network and simplify electrical lines arrangement.

Multiple gensets are usually used in one factory. Old traditional way for power distribution is done by man, which will cause unreasonable loads distribution on branch lines. Some genset’s load is too big and others are too small, not good for rational utilization of resources.


1.jpg

Disadvantages:

●Unreasonable loads sharing.

●Power break happens during power transfer and maintenance.

●Not good for local power network capacity expanding.

●Cable consumption is high.


2.jpg


Advantages:

●Reasonable loads sharing ensure gensets run under most economical conditions.

●High sustainability for impact load and load shocking.

●Excellent stabilization on output voltage and frequency.

●No break between multiple gensets transfer.

●Minimize cable consumption.

●Extremely convenient for local power network capacity expanding.


CAMDA Synchronization Panel Model Table

Synchronization
Model

Rated Current

Rated Output

Air Circuit
Breaker

Controller

KDBJG-630A

630A

100-350kW

DELIXI /FUJI

UK DEEPSEA
DSE7510

KDBJG-800A

800A

350-450kW

KDBJG-1000A

1000A

450-550kW

KDBJG-1250A

1250A

550-650kW

KDBJG-1600A

1600A

650-880kW

KDBJG-2000A

2000A

880-1120kW

KDBJG-2500A

2500A

1120-1250kW


Our characteristics:

●Our synchronization panel synchronizes multiple gensets to work in parallel.

●Synchronization process is fully automatic. After synchronization, various loads are automatically shared and controlled by set ratio, increasing or decreasing output, adding new genset or stoping online genset.

●Surprising flexibility for free combination. Every synchronization panel can be freely combined with any corresponding capacity genset. One panel with one genset, no matter what engine you use, no matter what alternator you have.

●Equipped with Deepsea DSE7510 controller. Ensuring you complete and reliable protections against various gensets defaults, reverse power, over current, over load.

●Comprehensive meter displaying for Power output, three phases current and voltage, frequency.

●Light and sound alarm for set faults.

●Emergency stop button beside control panel.

●Easy operation and convenient maintenance.

●Reasonable price and quick deliver.

●Enclosure cabinet are painted by electrostatic polyester powder paint. Protection class Ip23.


1.jpg


Hot Tags: ATS panel, China, suppliers, manufacturers, factory
Related Products
Inquiry