120 KW Biogas Generator
Ratings *Ratings at 0.8 power factor Performance Data * The above fuel consumption is calculate with the natural gas whose heat value is 35.8MJ/Nm 3 Dimensions and Weights Engine Brand & Model: HGN14 Engine Data How to check the battery: ◇Remove the adhesive tape and ventilation opening...
50Hz, 380/220V, 3 phases and 4 wires
*Ratings at 0.8 power factor
Engine Brand & Model
Alternator Brand & Model
Standard Noise Level@7m (Soundproof Sets)
Circuit Breaker Type
3 Poles MCCB
Frequency & Phase
50hz 3Phases + 4Wires
Engine Speed (RPM)
Fuel Consumption (Nm3/hr) 100% Load
* The above fuel consumption is calculate with the natural gas whose heat value is 35.8MJ/Nm3
Dimensions and Weights
Engine Brand & Model: HGN14
No. of Cylinders
Bore * Stroke (mm)
140 * 152
24V DC motor
Coolant capacity, including radiator (L)
15W40-CF4 or above grade
Oil pan capacity (L)
How to check the battery:
◇Remove the adhesive tape and ventilation opening cover.
◇In accordance with the level indication to fill electrolyte in each cubicles of the battery body. Electrolyte is a kind of pure sulphuric acid used for recharging. Its specific gravity is 1270 G/L (1230 G/L in tropical region). Its temperature will be around 15℃ when it's full on recharging.
◇After the batteries get full, please keep for 30 minutes-1 hour, and check the level of electrolyte, fill it up again if necessary.
◇Cover the ventilation opening, and clean the spilled electrolyte.
Caution: All the batteries will lose electricity after a period of time, even stored well.
Cold weather will also impact their performance.
◇In order to make the batteries work well, it's necessary to check the capacity of them and recharge ( 3 hours at least.) When their storage time is over 8 months or need work at low temperature, recharge is needed.
Use acid liquor safely:
It is normal to use acid liquor to clean weilding parts or spare parts. The following are some advices when to use acid liquor:
◇Avoid to touch skin, eyes and clothes
◇Be away from flammable resources, spark and fire when make rusting process
◇Don't let the acid liquor flow onto concrete floor because it will rot lime of concrete. If the acid liquor is flow onto concrete, please put some lye to neutralize.
◇Acid liquor will react with some metals and form some gas. Generally speaking, it will be formed carbon dioxide if acid liquor touch with concrete and metal cover, which is normal. But it will produce some toxic and exploding gas when acid liquor touch with aluminium, zinc, sulfur, etc. So when use the acid liquor, please keep well-ventilated and avoid unnecessary injury.
◇Please seal the bottle cover after using acid liquor and store it into suitable place.