50/60 Hz 30 KW Biogas Generator
Ratings *Ratings at 0.8 power factor Performance Data * The above fuel consumption is calculate with the natural gas whose heat value is 35.8MJ/Nm 3 Dimensions and Weights Engine Brand & Model: HG4B Engine Data How to replace AC alternator belt: ◇Take off fan cover; ◇Take off the 6 pins...
50Hz, 380/220V, 3 phases and 4 wires
*Ratings at 0.8 power factor
Engine Brand & Model
Alternator Brand & Model
Standard Noise Level@7m (Soundproof Sets)
Circuit Breaker Type
3 Poles MCCB
Frequency & Phase
50hz 3Phases + 4Wires
Engine Speed (RPM)
Fuel Consumption (Nm3/hr) 100% Load
* The above fuel consumption is calculate with the natural gas whose heat value is 35.8MJ/Nm3
Dimensions and Weights
Engine Brand & Model: HG4B
No. of Cylinders
Bore * Stroke (mm)
102 * 120
24V DC motor
Coolant capacity, including radiator (L)
15W40-CF4 or above grade
Oil pan capacity (L)
How to replace AC alternator belt:
◇Take off fan cover;
◇Take off the 6 pins which are used to fix the fan on the pulley, then take off the whole discreteness;
Be careful: Please take care when we take off the fan, and ensure not to mangle the radiator.
◇Loosen the bracket of alternator and adjusting screw. Take off the used belt, examine there is not any oil stain in the wheel groove, then fit on a new belt;
◇Fit on the fan, fasten the pin and adjust AC alternator belt to be a proper tightness, then fit on the fan.
How to examine the absorber of crankshaft:
There is a poise of absorber in a container which is full of liquid. The poise can move in the container to limit the torsion shaking. Checking the absorber whether there is any flute, breach or liquid leaking. If there is any one of them, the absorber must be changed.
The absorber is assembled in the crankshaft, it is in behind of the belt cover which is in front of engine. About how to change absorber, please consult "Operation Manual".