30 KW Gas Generator
Ratings *Ratings at 0.8 power factor Performance Data * The above fuel consumption is calculate with the natural gas whose heat value is 35.8MJ/Nm 3 Dimensions and Weights Engine Brand & Model: HG4B Engine Data CAMDA gas gen-sets, automatic/manual control system, electronic governor,...
50Hz, 380V, 3 phases and 4 wires
*Ratings at 0.8 power factor
Engine Brand & Model
Alternator Brand & Model
Standard Noise Level@7m (Soundproof Sets)
Circuit Breaker Type
3 Poles MCCB
Frequency & Phase
50hz 3Phases + 4Wires
Engine Speed (RPM)
Fuel Consumption (Nm3/hr) 100% Load
* The above fuel consumption is calculate with the natural gas whose heat value is 35.8MJ/Nm3
Dimensions and Weights
Engine Brand & Model: HG4B
No. of Cylinders
Bore * Stroke (mm)
102 * 120
24V DC motor
Coolant capacity, including radiator (L)
15W40-CF4 or above grade
Oil pan capacity (L)
CAMDA gas gen-sets, automatic/manual control system, electronic governor, automatic multifunction monitoring, automatic shut down protection.
Type of fuel: Natural gas, biogas, biomass gas, coal mine gas, etc.
Gas requirements for Camda gas generator sets:
◇There shouldn't be free water of particles in the gas(The size of impurities in the gas mustt be smaller than 5um.).
◇The calorific value is equal or higher than 5000kcal/m3. If the calorific value is too low (lower than 5000kcal/m3), the power of genset will decrease.
◇Sulphur contents is lower than 250mg/m, the excessive sulphur in impurity gas should be removed. (Note: If the sulfur content is too high, it will damage engine components.)